Display

Symptom	Remedy
The display is dark or off.	• Press DIMMER repeatedly to select a different brightness.

After making an adjustment	• Press DIMMER repeatedly to select a different brightness.
the display goes off.

You can’t get DIGITAL to display when using SIGNAL SEL.

•Check the digital connections and make sure that the digital inputs are assigned correctly (see The Input Setup menu on page 39).

•If the multichannel analog inputs are selected, select a different input function.

2 DIGITAL or DTS does not	• These indicators does not light if playback is paused.
light when playing Dolby/DTS	• Check the playback (especially the digital output) settings of the source
software.	component.

When playing Dolby Digital	• Check that the player is connected using a digital connection.
or DTS sources, the receiver’s	• Make sure that the receiver is set to AUTO or DIGITAL (see Choosing the
format indicators do not light. input signal on page 58).
	• Check that the player isn’t set up so that Dolby Digital and DTS sources are
	converted to PCM.
	• Ensure that if there are several audio tracks on the disc, the Dolby Digital or
	DTS is selected.

When playing certain discs,	• The disc may not contain 5.1/6.1 channel material. Check the disc packaging
none of the receiver’s format	for more on what audio tracks are recorded on the disc.
indicators light.

When playing a disc with the	• Make sure that the receiver is set to AUTO or DIGITAL (see Choosing the
listening mode set to Auto	input signal on page 58).
Surround or ALC, 2 PL II or	• If a two channel soundtrack is currently playing (including Dolby Surround

Neo:6 appear on the receiver. encoded), then this is not a malfunction. Check the disc packaging for details

	about the audio tracks available.
During playback of a	• The source may be Dolby Surround EX/DTS-ES software, but it has no flag to
Surround EX or DTS-ES	indicate it is 6.1 compatible. Set to SBch ON (see Using surround back channel
source on the SBch AUTO	processing on page 56), then switch to the Standard EX listening mode (see
setting, EX or ES does not	Listening in surround sound on page 53).
appear, or the signal is not
properly processed.

During playback of DVD- Audio, the display shows PCM.

•This will occur when playing DVD-Audio material over the HDMI connection. This is not a malfunction.

108