PictBridge

You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. You can set up the following settings from the PictBridge menu.

 

IMAGES

: Select the pictures to be printed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PRINTER SETUP

: Setting up printing(AUTO SET/CUSTOM SET)

 

 

 

 

 

 

 

 

 

 

 

 

PRINT

: Printing pictures

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DPOF AUTO PRINT

: Printing the DPOF files

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RESET

: Initializing the PictBridge functions

 

 

 

 

 

 

Connecting the Camera to a Printer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Press the power button to turn the camera power on.

 

 

 

2592

 

 

 

2. In a mode other than Voice Recording mode, press the

 

 

 

 

 

 

 

 

 

SET UP

 

MENU button.

 

 

 

 

 

 

 

 

LAMP

 

COMPUTER

 

3. Press the LEFT/ RIGHT button and select [SETUP]

 

 

SOUND

 

PRINTER

 

 

 

menu tab.

 

 

 

USB

 

 

 

 

 

4. Select [USB] menu by pressing the UP/ DOWN button

 

 

BACK:

 

SET:OK

 

 

 

 

 

 

 

 

 

 

 

 

 

and press the RIGHT button.

 

 

 

 

 

 

5. Select [PRINTER] menu by pressing the UP/ DOWN button and press the OK button.

6. Press the menu button twice and the menu will disappear.

7. Use the supplied USB cable to connect the camera to the printer as shown below.

8. Turn on the printer to connect the camera to the printer.

If you selected [COMPUTER] in Step 5, when you connect the camera to your printer, the Mode dial lamp(Green) will illuminate and the connection will not be established. In this case, disconnect the USB cable, and then follow the procedure from Step 2 and onward.

70