Function lamp
Description of the Function lamp
Function | Description | |
During | Function lamp blinks and then turns off when the camera is ready to | |
take a picture | ||
| ||
|
| |
After an image is captured | Function lamp will blink once. | |
|
| |
During voice recording | Function lamp will blink at a | |
|
| |
While recording a movie clip | Function lamp will blink at a | |
|
| |
When the | Even if the function lamp is set to OFF, the | |
activated | (See page 34.) | |
|
|
Sound
If you set the operation sound to ON, various sounds will be activated for camera startup, when button are pressed, and if there is a card error, so that you can be aware of the camera operation status.
Setting Operation Sounds
1.In any mode with the exception of Voice Recording mode, press the MENU button.
2.Press the LEFT/ RIGHT button and select the [SETUP] menu tab.
3.Select the [SOUND] menu by pressing the UP/ DOWN button and press the RIGHT button.
4.Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
[SOUND] sub menu : OFF/ LOW/ MEDIUM/ HIGH
5.Press the menu button twice and the menu will disappear.
2592
SETUP
IMPRINT OFF
LAMP LOW
SOUND MEDIUM
BACK:SET:OK
82