Video
Black Side Panel
The BLACK SIDE PANEL function turns the gray side bars on/off when watching 4:3 signals in Standard mode. The top/bottom gray bar will appear in SPLIT MODE PIP and SPLIT FREEZE. The TV set will always return to “Set Black Side Panel - OFF” setting every time the TV is powered “OFF”.
NOTE: To maximize operating life of the TV’s picture tubes when watching 4:3 signal, Black Side Panel is cancelled at Power OFF. It is recommended to watch 4:3 signal with gray side bar.
Virtual HD
Use this feature to quickly change the scanning mode from 540p (progressive scanning) to 1080i (interlace scanning).
When images from film are processed for broadcast to your home, picture noise or distortion can occur. Virtual HDTM technology reduces this noise to a minimum, recreating the smooth curves and high fidelity image of the original film source.
NOTE: VIRTUAL HD is not available (grayed out) in Digital Channels, 1080i input, HDMI and components.
Reset Video Settings
This function allows you to Reset the Video Menu Settings of the present input and return it to the Day VIDEO mode.
1. Use the CURSOR buttons or to highlight the function to be adjusted.
2.Press the SELECT button to select RESET VIDEO SETTINGS.
3. Use the CURSOR button to access other video settings.
You can customize each of the Video Inputs to your preference to increase viewing performance and pleasure, depending upon the video program being viewed. If RESET is selected, only the selected Input will reset to the initial conditions as explained above.
If RESET is selected in Input 1, only Input 1 will return to factory conditions.
OR
|
| Video |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Sharpness |
| 50% |
|
| |
|
| Color Temperature |
| High |
| ||
|
| Black Enhancement |
| Middle |
| ||
|
| Edge Enhancement |
| High |
| ||
|
| Noise Reduction |
| Off |
| ||
|
| Aspect |
|
|
|
|
|
|
| Black Side Panel |
| Off |
| ||
|
| Virtual HD |
|
| 1080i |
| |
|
| Reset Video Settings |
|
|
|
| |
|
| Move | SEL Return |
|
|
|
|
|
|
|
|
|
|
|
|
Video
Reset Video Settings
Select “Reset” to return the video menu settings on this Input to the original factory settings.
Reset
Select “Yes” to fix the Video Menu Settings to the original factory Settings on all modes.
No 
Yes
Move SEL Return
NOTE: 1. If YES and ALL MENU SETTINGS are selected, the VIDEO MENU SETTINGS will be reset to the original factory settings on all modes during the next power on/off. However, if a CableCARD is installed (see page 11) or the “Quick Start Up” (see page 55) is set to ON, the VIDEO MENU SETTINGS will not reset and will be kept. In these two cases, please unplug the AC Power Cord to reset all settings.
2. If YES is selected, the LOCKS settings or PARENTAL CONTROL feature will also reset.
34
