Search tuning
1.Press the Power button to turn on the radio.
2.Press the Band button to get required waveband, then extend and position telescopic aerial ( FM ) or rotate the radio (AM).
3.Press and hold down either Tuning up or Tuning down buttons for more than 0.5 seconds to commerce Search tuning.
4.The radio will search and stop automatically when it finds a station of sufficient strength.
5.When the waveband end is reached, the radio will continue tuning from the opposite waveband end .
6.Press the Volume Up/Down buttons to the required level.
7.To switch off your radio, press the Power button. The display will show OFF.
Memory preset tuning
Storing stations in preset memories
There are 5 presets for each waveband.
1.Press the Power button to turn on the radio.
2.Tune to the required station using one of the methods previously described.
3.Press and hold down required preset until the radio beeps
( more than 2 seconds ). The preset number will appear with a M ( memory ) and the station will be stored under the chosen preset button.
4.Repeat the procedures for the remaining presets.
5.Stations stored in preset memories may be overwritten by following the above procedures.
GB
6
