Operating your radio
Your radio is equipped with three tuning methods – Manual Tuning, Search tuning and Memory preset tuning.
Manual Tuning
1.Press the Power button to turn on the radio.
2.Select the required waveband by repeatedly pressing the Band button. For FM waveband, pull out and extend the FM wire antenna located in the battery compartment to get best reception. For MW ( AM ) waveband, rotate the radio for best reception.
3.A single press on either Tuning up or Tuning down buttons will change the frequency in the following increments:
FM: 100 or 200 kHz ( USA version )
50 or 100 kHz ( standard version ) AM ( MW ): 9 or 10 kHz
4.When the waveband end is reached, the radio will continue tuning from the opposite waveband end.
5.Press the Volume Up/Down buttons to the required level.
6.To switch off your radio, press the Power button. The display will show OFF.
5
