Setup

Manual Convergence Adjustment Mode (117 Point Manual Adjustment)

NOTE: 1. Please turn ON your television for at least 20 minutes before using this feature.

2.AUTO ADJUSTMENT MODE is recommended. If convergence is still not acceptable, use the MANUAL

ADJUSTMENT MODE.

3.If AUTO ADJUSTMENT MODE is selected or the MAGIC FOCUS button is pressed, all manual adjust mode settings will be erased.

Using the Remote Control, select SETUP, MAGIC

FOCUS TUNE UP, MANUAL ADJUSTMENT MODE, 117 POINT MANUAL, START to access convergence

117 point pattern. The adjustment point is indicated by the Adjustment Point Cursor.

To Move Adjustment Point

To move the Adjustment Point Cursor using the CURSOR buttons, the Adjustment Point Cursor must be WHITE. Another way to move the Adjustment Point Cursor is to press the following buttons: [2] up, [4] left,

[5]down, [6] right. If you use the number buttons while the adjustment point is WHITE, it will change to RED.

To Change the Color of Adjustment Point Press the SELECT button repeatedly (WHITE-RED- BLUE-WHITE...).GREEN color is fixed and cannot be adjusted.

To Adjust the Convergence

Move the Adjustment Point Cursor to the point to be adjusted. Use the CURSOR buttons to match the RED and BLUE colors to GREEN (reference color). Properly aligned, all three colors should appear white.

If convergence is acceptable after MANUAL CONVERGENCE adjustment, press EXIT button to access menu mode.

1.Use the CURSOR buttons to highlight your chosen option.

2.Press the SELECT button to select.

3.Select CANCEL to cancel adjusted data and return to main picture.