3Com 3CRWX440095A, 3CRWX120695A manual Syntax clear security acl map acl-nameall vlan vlan-id

372CHAPTER 12: SECURITY ACL COMMANDS

Syntax — clear security acl map {acl-nameall} {vlan vlan-id

port port-list [tag tag-value] dap dap-num} {in out}

„acl-name— Name of an existing security ACL to clear. ACL names start with a letter and are case-insensitive.

„all — Removes security ACL mapping from all physical ports, virtual ports, and VLANs on a WX switch.

„vlan vlan-id— VLAN name or number. MSS removes the security ACL from the specified VLAN.

„port port-list— Port list. MSS removes the security ACL from the specified WX physical port or ports.

„tag tag-value— Tag value that identifies a virtual port in a VLAN. Specify a value from 1 through 4095. MSS removes the security ACL from the specified virtual port.

„dap dap-num— One or more Distributed MAPs, based on their connection IDs. Specify a single connection ID, or specify a comma-separated list of connection IDs, a hyphen-separated range, or any combination, with no spaces. MSS removes the security ACL from the specified Distributed MAPs.

„in — Removes the security ACL from traffic coming into the WX switch.

„out — Removes the security ACL from traffic going out of the WX switch.

Defaults — None.

Access — Enabled.

History — Introduced in MSS Version 3.0.

Usage — To clear a security ACL map, type the name of the ACL with the VLAN, physical port or ports, virtual port tag, or Distributed MAP and the direction of the packets to stop filtering. This command deletes the ACL mapping, but not the ACL.

Examples — To clear the mapping of security ACL acljoe from port 4 for incoming packets, type the following command:

WX4400# clear security acl map acljoe port 4 in clear mapping accepted