3Com 3CRWX120695A, 3CRWX440095A manual Clear port type, Port, Network port defaults

clear port type 61

clear port type	Removes all configuration settings from a port and resets the port as a
	network port.
	CAUTION: When you clear a port, MSS ends user sessions that are using
	the port.

Syntax — clear port type port-list

„port-list— List of physical ports. MSS resets and removes the configuration from all the specified ports.

Defaults — The cleared port becomes a network port but is not placed in any VLANs.

Access — Enabled.

History — Introduced in MSS Version 3.0.

Usage — Use this command to change a port back to a network port. All configuration settings specific to the port type are removed. For example, if you clear an MAP access point port, all MAP-specific settings are removed. Table 10 lists the default network port settings that MSS applies when you clear a port’s type.

Table 10 Network port defaults

Port Parameter	Setting
VLAN membership	None.
	Note: Although the command changes a port to a
	network port, the command does not place the port
	in any VLAN. To use the port in a VLAN, you must
	add the port to the VLAN.
Spanning Tree Protocol (STP)	Based on the VLAN(s) you add the port to.
802.1X	No authorization.
Port groups	None.
Internet Group Management	Enabled as port is added to VLANs.
Protocol (IGMP) snooping
Access point and radio	Not applicable
parameters
Maximum user sessions	Not applicable