3Com 3CRWX120695A, 3CRWX440095A manual Clear prompt, Clear system

clear prompt 39

	Examples — To clear the history buffer, type the following command:
	WX4400# clear history
	success: command buffer was flushed.
	See Also
	„ history on page 46
clear prompt	Resets the system prompt to its previously configured value. If the prompt
	was not configured previously, this command resets the prompt to its
	default.
	Syntax — clear prompt
	Defaults — None.
	Access — Enabled.
	History — Introduced in MSS Version 3.0.
	Examples — To reset the prompt, type the following command:
	wildebeest# clear prompt
	success: change accepted.
	WX4400#
	See Also
	„ set prompt on page 50. (For information about default prompts, see
	“Command Prompts” on page 22.)
clear system	Clears the system configuration of the specified information.
	CAUTION: If you change the IP address, any currently configured
	Mobility Domain operations cease. You must reset the Mobility Domain.
	Syntax — clear system [contact countrycode ip-address
	location name]
	„ contact — Resets the name of contact person for the WX switch to
	null.
	„ countrycode — Resets the country code for the WX switch to null.
	„ ip-address— Resets the IP address of the WX switch to null.