set fdb 101

Table 24 Output for display vlan config (continued)

Field

Description

 

 

VLAN State

Link status of the VLAN:

 

„ Down — The VLAN is not connected.

 

„ Up — The VLAN is connected.

 

 

Tunl Affin

Tunnel affinity value assigned to the VLAN.

 

 

Port

Member port of the VLAN. The port can be a physical port or a

 

virtual port.

 

„ Physical ports are 10/100 Ethernet or gigabit Ethernet ports on

 

the WX switch, and are listed by port number.

 

„ Virtual ports are tunnels to other WX switches in a mobility

 

domain, and are listed as follows: t:ip-addr, where ip-addris the

 

system IP address of the WX switch at the other end of the

 

tunnel.

 

Note: This field can include MAP access ports and wired

 

authentication ports, because MSS dynamically adds these ports to a

 

VLAN when handling user traffic for the VLAN.

 

 

Tag

Tag value assigned to the port.

 

 

Port State

Link state of the port:

 

„ Down — The port is not connected.

 

„ Up — The port is connected.

 

 

See Also

„clear vlan on page 91

„set vlan name on page 103

„set vlan port on page 104

„set vlan tunnel-affinityon page 105

set fdb

Adds a permanent or static entry to the forwarding database.

Syntax set fdb {perm static}

mac-addr port port-list vlan vlan-id [tag tag-value]

„perm — Adds a permanent entry. A permanent entry does not age out and remains in the database even after a reboot, reset, or power cycle.

„static — Adds a static entry. A static entry does not age out, but is removed from the database after a reboot, reset, or power cycle.

Page 101
Image 101
3Com 3CRWX120695A manual Set fdb, Adds a permanent or static entry to the forwarding database, Syntax set fdb perm static