3Com 3CRWX120695A, 3CRWX440095A manual Clear ntp server, Update-interval

	clear ntp server 113
	„ set ip telnet on page 146
	„ set ip telnet server on page 147
clear ntp server	Removes an NTP server from a WX switch configuration.
	Syntax — clear ntp server {ip-addrall}
	„ ip-addr— IP address of the server to remove, in dotted decimal
	notation.
	„ all — Removes all NTP servers from the configuration.
	Defaults — None.
	Access — Enabled.
	History — Introduced in MSS Version 3.0.
	Examples — The following command removes NTP server
	192.168.40.240 from a WX switch configuration:
	WX4400# clear ntp server 192.168.40.240
	success: change accepted.
	See Also
	„ clear ntp update-intervalon page 113
	„ display ntp on page 126
	„ set ntp on page 148
	„ set ntp server on page 148
	„ set ntp update-intervalon page 149
clear ntp	Resets the NTP update interval to the default value.
update-interval	Syntax — clear ntp update-interval
	Defaults — The default NTP update interval is 64 seconds.
	Access — Enabled.
	History — Introduced in MSS Version 3.0.