3Com 3CRWX440095A, 3CRWX120695A Clear dot1x, Bonded-period, Option, Which disables the feature

422CHAPTER 15: 802.1X MANAGEMENT COMMANDS

Table 77 802.1X Commands by Usage (continued)

Type	Command
Reauthentication, cont.	clear dot1x reauth-maxon page 425
	set dot1x reauth-periodon page 436
	clear dot1x reauth-periodon page 425
Retransmission	set dot1x max-reqon page 433
	clear dot1x max-reqon page 423
Quiet Period and Timeouts	set dot1x quiet-periodon page 434
	clear dot1x quiet-periodon page 424
	set dot1x timeout auth-serveron page 437
	clear dot1x timeout auth-serveron
	page 426
	set dot1x timeout supplicant on page 437
	clear dot1x timeout supplicant on page 426
Settings, Active Clients, and	display dot1x on page 427
Statistics

clear dot1x	Resets the Bonded Auth™ (bonded authentication) period to its default
bonded-period	value. The bonded period is the number of seconds MSS retains session
	information for an authenticated machine while waiting for an 802.1X
	client on the machine to start (re)authentication for the user. When
	bonded authentication is enabled, it applies only to an 802.1X user
	whose authentication rule on the WX switch contains the bonded
	option.
	Syntax — clear dot1x bonded-period
	Defaults — The default bonded authentication period is 0 seconds,
	which disables the feature.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Examples — To reset the Bonded period to its default, type the
	following command:

WX4400# clear dot1x bonded-period success: change accepted.