3Com 3CRWX120695A, 3CRWX440095A manual Set snmp trap, See Also „ clear snmp trap receiver on

set snmp trap receiver 153

	History —Introduced in MSS Version 3.0.
	Usage — You can enable or disable the linkup and linkdown traps on an
	individual port basis with the set port trap command. The individual port
	setting overrides the global setting.
	Examples — The following command disables all traps:
	WX4400# set snmp trap disable all
	success: change accepted.
	The following command reenables authentication traps:
	WX4400# set snmp trap enable AuthenTraps
	success: change accepted.
	See Also
	„ clear snmp trap receiver on page 114
	„ display snmp configuration on page 128
	„ set ip snmp server on page 142
	„ set snmp community on page 150
	„ set snmp trap receiver on page 153
set snmp trap	Adds an IP address to the SNMP trap receiver table.
receiver	Syntax — set snmp trap receiver ip-addr
	„ ip-addr— IP address of the trap receiver, in dotted decimal notation.
	Defaults — None.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Examples — To set the IP address of the SNMP trap receiver to
	192.168.0.1, type the following command:
	WX4400# set snmp trap receiver 192.168.0.1
	success: change accepted.

See Also

„clear snmp trap receiver on page 114