3Com 3CRWX440095A See Also „ clear port-groupon „ set port-groupon, Output for display port poe

64CHAPTER 4: PORT COMMANDS

See Also

„clear port-groupon page 59

„set port-groupon page 77

display port poe Displays status information for ports on which Power over Ethernet (PoE) is enabled.

Syntax — display port poe [port-list]

„port-list— List of physical ports. If you do not specify a port list, PoE information is displayed for all ports.

Defaults — None.

Access — All.

History — Introduced in MSS Version 3.0.

Examples — The following command displays PoE information for all ports on a WX1200 switch:

WX1200# display port poe		PoE	PoE
Link	Port			Draw
Port Name	Status	Type	config

============================================================

1	1	up	-	disabled	off
2	2	down	-	disabled	off
3	3	down	-	disabled	off
4	4	down	MAP	enabled	1.44
5	5	down	-	disabled	off
6	6	down	-	disabled	off

Table 12 describes the fields in this display.

Table 12 Output for display port poe

Field	Description
Port	Port number.
Name	Port name. If the port does not have a name, the
	port number is listed.