3Com 3CRWX120695A Set ap dap radio antennatype, „ antennatype ANT1060 ANT1120 ANT1180 internal

Syntax —

set {ap dap} radio antennatype 269

set {ap dap} radio antennatype

Sets the external antenna model for a MAP that supports external antennas.

set {ap port-list dap dap-num}radio

{1 antennatype ANT1060 ANT1120 ANT1180 internal} {2 antennatype ANT5060 ANT5120 ANT5180 internal}

„ap port-list— List of ports connected to the MAP access points on which to set the channel.

„dap dap-num— Number of a Distributed MAP on which to set the channel.

„radio 1 — Radio 1 of the MAP.

„radio 2 — Radio 2 of the MAP. (This option does not apply to single-radio models.)

„antennatype {ANT1060 ANT1120 ANT1180 internal} —

802.11b/g external antenna models:

„ANT1060 — 60° 802.11b/g antenna

„ANT1120 — 120° 802.11b/g antenna

„ANT1180 — 180° 802.11b/g antenna

„internal — uses the internal antenna instead

„antennatype {ANT5060 ANT5120 ANT5180 internal} —

802.11a external antenna models:

„ANT5060 — 60° 802.11a antenna

„ANT5120 — 120° 802.11a antenna

„ANT5180 — 180° 802.11a antenna

„internal — uses the internal antenna instead

Defaults — All radios use the internal antenna by default. (The MP-262 802.11b/g radio does not have an internal antenna, and uses model ANT1060 by default.)

Access — Enabled.

History — Introduced in MSS Version 3.0. Model numbers added for 802.11a external antennas, and the default changed to internal (except for the MP-262) in MSS Version 3.2.