![](/images/new-backgrounds/1068788/6878871x1.webp)
Installation
Hang the installation frame on the four screws . The holes for the screws should be on the left when seen from the front.
If using the spacer frame, place the two covers into the fixing holes.
Align the installation frame to the middle line and secure it with the screws.
The spacers, which were removed from the spacer frame at the start, can be used to align the cooker hood vertically .
Holding the installation frame securely, remove the two fixing screws and extend the installation frame to its maximum length .
Replace the screws.
36