98 CHAPTER 5: VLAN COMMANDS
display roaming vlan
Shows all VLANs in the mobility domain, the WX switches servicing the
VLANs, and their tunnel affinity values configured on each switch for the
VLANs.
Syntax — display roaming vlan
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command shows the current roaming
VLANs:
WX4400# display roaming vlan
VLAN WX Affinity
---------------- --------------- --------
vlan-cs 192.168.14.2 5
vlan-eng 192.168.14.4 5
vlan-fin 192.168.14.2 5
vlan-it 192.168.14.4 5
vlan-it 192.168.14.2 5
vlan-pm 192.168.14.2 5
vlan-sm 192.168.14.2 5
vlan-tp 192.168.14.4 5
vlan-tp 192.168.14.2 5
Table22 describes the fields in the display.
See Also
display roaming station on page 96
display vlan config on page 100
Table22 Output for display roaming vlan
Field Description
VLAN VLAN name.
WX System IP address of the wireless LAN switch on which the
VLAN is configured.
Affinity Preference of this WX switch for forwarding user traffic for
the VLAN. A higher number indicates a greater preference.