3Com 3CRWX120695A, 3CRWX440095A manual Fver

fver 519

fver	Displays the version of a system image file installed in a specific location
	on a WX switch.
	Syntax — fver {c: d: e: f: boot0: boot1:}
	[filename]
	„ c: — Nonvolatile storage area containing boot partition 0 (primary).
	„ d: — Nonvolatile storage area containing boot partition 1
	(secondary).
	„ e: — Primary partition of the flash card in the flash card slot.
	„ f: — Secondary partition of the flash card in the flash card slot.
	„ boot0: — Boot partition 0.
	„ boot1: — Boot partition 1.
	„ filename — System image filename.
	Defaults — None.
	Access — Boot prompt.
	History —Introduced in MSS Version 3.0.
	Usage — To display the image filenames, use the dir command. This
	command does not list the boot code versions. To display the boot code
	versions, use the version command.
	Examples — The following command displays the system image version
	installed in boot partition 1:
	boot> fver boot1
	File boot1:default version is 3.0.1.

See Also

„dir on page 516

„version on page 524