3Com 3CRWX120695A, 3CRWX440095A set ip snmp server

142 CHAPTER 6: IP SERVICES COMMANDS

Examples — The following command adds a default route that uses

gateway 10.5.4.1 and gives the route a cost of 1:

WX4400# set ip route default 10.5.4.1 1

success: change accepted.

The following commands add two default routes, and configure MSS to

always use the route through 10.2.4.69 when the interface to that

gateway router is up:

WX4400# set ip route default 10.2.4.69 1

success: change accepted.

WX4400# set ip route default 10.2.4.17 2

success: change accepted.

The following command adds an explicit route from a WX switch to any

host on the 192.168.4.x subnet through the local router 10.5.4.2, and

gives the route a cost of 1:

WX4400# set ip route 192.168.4.0 255.255.255.0 10.5.4.2 1

success: change accepted.

The following command adds another explicit route, using CIDR notation

to specify the subnet mask:

WX4400# set ip route 192.168.5.0/24 10.5.5.2 1

success: change accepted.