3Com 3CRWX440095A, 3CRWX120695A manual An associated client

240CHAPTER 9: MANAGED ACCESS POINT COMMANDS

Table 45 Output for display ap config (continued)

Field	Description
auto-tune	Minimum data rate the radio must maintain for associated
min-client-rate	clients. When RF Auto-Tuning is enabled, the radio can
	temporarily increase its power to maintain the data rate with
	an associated client.
auto-tune	Maximum percentage of packets that can be retransmitted
max-retransmissions	by a client before RF Auto-Tuning increases power.
	Note: Only packets that are received twice by the MAP are
	counted as retransmissions. If a client retransmits a packet
	but the MAP receives only a single copy of the packet, the
	packet is not counted as a retransmission.

See Also

„display dap connection on page 253

„display dap global on page 254

„display dap unconfigured on page 256

„display radio-profileon page 257

„set dap on page 73

„set port type ap on page 83

„set {ap dap} bias on page 264

„set {ap dap} group on page 267

„set {ap dap} name on page 268

„set {ap dap} upgrade-firmwareon page 279

„set {ap dap} radio mode on page 276

„set {ap dap} radio antennatype on page 269

„set {ap dap} radio channel on page 273

„set {ap dap} radio radio-profileon page 277

„set {ap dap} radio tx-poweron page 278