3Com 3CRWX440095A manual Output for display radio-profile, WX4400# display radio-profile default

258CHAPTER 9: MANAGED ACCESS POINT COMMANDS

WX4400# display radio-profile default			1
Beacon Interval:	100	DTIM Interval:
Max Tx Lifetime:	2000	Max Rx Lifetime:	2000
RTS Threshold:	2346	Frag Threshold:	2346
Short Retry Limit:	5	Long Retry Limit:	5
Long Preamble:	NO	Allow 802.11g clients only:	NO
Tune Channel:	no	Tune Power:	no
Tune Channel Interval:	3600	Tune Power Interval:	600
Client Backoff Timer:	10	Channel Holddown:	300

Service profiles: default-dot1x, default-clear

Table 55 describes the fields in this display.

Table 55 Output for display radio-profile

Field	Description
Beacon Interval	Rate (in milliseconds) at which each MAP radio in the profile
	advertises the beaconed SSID.
DTIM Interval	Number of times after every beacon that each MAP radio in
	the radio profile sends a delivery traffic indication map
	(DTIM).
Max Tx Lifetime	Number of milliseconds that a frame received by a radio in
	the radio profile can remain in buffer memory.
Max Rx Lifetime	Number of milliseconds that a frame scheduled to be
	transmitted by a radio in the radio profile can remain in
	buffer memory.
RTS Threshold	Minimum length (in bytes) a frame can be for a radio in the
	radio profile to use the RTS/CTS method to send the frame.
	The RTS/CTS method clears the air of other traffic to avoid
	corruption of the frame due to a collision with another
	frame.
Frag Threshold	Maximum length (in bytes) a frame is allowed to be without
	being fragmented into multiple frames before transmission
	by a radio in the radio profile.
Short Retry Limit	Number of times a radio in the radio profile can send a short
	unicast frame without receiving an acknowledgment.
Long Retry Limit	Number of times a radio in the radio profile can send a long
	unicast frame without receiving an acknowledgment. A long
	unicast frame is a frame that is equal to or longer than the
	RTS threshold.