3Com 3CRWX440095A, 3CRWX120695A manual Mobility-domain, Member

224CHAPTER 8: MOBILITY DOMAIN COMMANDS

clear	Clears all Mobility Domain configuration and information from a WX
mobility-domain	switch, regardless of whether the WX switch is a seed or a member of a
	Mobility Domain.
	Syntax — clear mobility-domain
	Defaults — None.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Usage — This command has no effect if the WX switch is not configured
	as part of a Mobility Domain.
	Examples — To clear a Mobility Domain from a WX switch within the
	domain, type the following command:
	WX1200# clear mobility-domain
	success: change accepted.
	See Also
	„ clear mobility-domain member on page 224
	„ set mobility-domain member on page 227
	„ set mobility-domain mode member seed-ipon page 227
	„ set mobility-domain mode seed domain-nameon page 228
clear	On the seed WX switch, removes the identified member from the
mobility-domain	Mobility Domain.
member	Syntax — clear mobility-domain member ip-addr
	„ ip-addr— IP address of the Mobility Domain member, in dotted
	decimal notation.
	Defaults — None.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.