set radio-profile auto-tune power-config 285

set radio-profile auto-tune power-config

Enables or disables dynamic power tuning (RF Auto-Tuning) for the MAP radios in a radio profile.

Syntax set radio-profile name auto-tune power-config {enable disable}

„name — Radio profile name.

„enable Configures radios to dynamically set their power levels when the MAPs are started.

„disable Configures radios to use their statically assigned power levels, or the default power levels if unassigned, when the radios are started.

Defaults — Dynamic power assignment is disabled by default.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — When RF Auto-Tuning for power is disabled, MSS does not dynamically set the power levels when radios are first enabled and also does not tune power during operation with associated clients.

When RF Auto-Tuning for power is enabled, MSS does not allow you to manually change the power level.

Examples — The following command enables dynamic power tuning for radios in the rp2 radio profile:

WX4400# set radio-profile rp2 auto-tune power-config enable success: change accepted.

See Also

„set {ap dap} radio auto-tunemax-poweron page 270

„set {ap dap} radio auto-tune max- retransmissions on page 271

„set radio-profileauto-tunechannel-configon page 281

„set radio-profileauto-tunepower-backoff- timer on page 284

„set radio-profileauto-tunepower-intervalon page 286

Page 285
Image 285
3Com 3CRWX120695A, 3CRWX440095A manual Set radio-profile auto-tune power-config