78
2. Using a network-connected machine
Wired network setup
You must set up the network protocols on your machine to use it on your
network.
You can use network after connecting network cable to a corresponding port on
your machine.
For models that do not have the display screen on the control panel, use the
Embedded Web Service or SetIP program.
- See "Using Embedded Web Service" on page 95.
- See "Setting IP address" on page 78.
3

Printing a network configuration report

You can print Network Configuration Report from the machine’s control panel
that will show the current machine’s network settings. This will help you to set
up a network.
Press the (Info) button on the control panel.
Using this Network Configuration Report, you can find your machine’s MAC
address and IP address.
For example:
MAC Address: 00:15:99:41:A2:78
IP Address: 169.254.192.192
4

Setting IP address

First, you have to set up an IP address for network printing and managements.
In most cases a new IP address will be automatically assigned by a DHCP
(Dynamic Host Configuration Protocol) server located on the network.

IPv4 configuration using SetIP (Windows)

Before using the SetIP program, disable the computer firewall from Control
Panel > Security Center > Windows Firewall.
The following instructions may differ for your model.
1Install this program from the supplied CD-ROM by double-click
Application > SetIP > Setup.exe.
2 Follow the instructions in the installation window.
3 Connect your machine to the network with a network cable.
4 Turn on the machine.
5 From the Windows Start menu, select All Programs > Dell > Dell
Printers > SetIP > SetIP.