2. Using a network-connected machine
IPv4 configuration using SetIP (Macintosh)
Before using the SetIP program, disable the computer firewall from System Preferences > Security > Firewall.
The following instructions may vary from your model.
1 Connect your machine to the network with a network cable.
2 Insert the Installation CD-ROM, and open the disk window, select MAC_Installer > MAC_Printer > SetIP > SetIPapplet.html.
3 Double-click the file and Safari will automatically open, then select Trust. The browser will open the SetIPapplet.html page that shows the printer’s name and IP address information.
4 Click the icon (third from left) in the SetIP window to open the TCP/ IP configuration window.
5 Enter the machine’s new information into the configuration window. In a corporate intranet, you may need to have this information assigned by a network manager before proceeding.
Wired network setup
6Click the 
icon (third from left) in the SetIP window to open the TCP/IP configuration window.
7Enter the machine’s new information into the configuration window as follows. In a corporate intranet, you may need to have this information
assigned by a network manager before proceeding.
Find the machine’s MAC address from the Network Configuration Report (see "Printing a network configuration report" on page 78) and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8.
8Click Apply, and then click OK. The machine will automatically print the Network Configuration Report. Confirm that all the settings are
correct.
79
