Dell B1260DN manual IPv6 configuration, From the control panel, From the Embedded Web Service

IPv6 configuration

IPv6 is supported properly only in Windows Vista or higher.

If the IPv6 network seems to not be working, set all the network setting to the factory defaults and try again using Clear Setting.

7The Add Printer Wizard window appears. Follow the instructions in the window.

If the machine does not work in the network environment, activate IPv6. Refer to the next section followed by.

In the IPv6 network environment, follow the next procedure to use the IPv6 address.

From the control panel

1Connect your machine to the network with a network cable.

2Turn on the machine.

3Print a Network Configuration Report that will check IPv6 addresses (see "Printing a network configuration report" on page 78).

4Select Start > Control Panel > Printers and Faxes.

5Click Add a printer in the left pane of the Printers and Faxes windows.

6Click Add a local printer in the Add Printer windows.

From the Embedded Web Service

For models that do not have the display screen on the control panel, you need to access Embedded Web Service first using the IPv4 address and follow the below procedure to use IPv6.

1Access a web browser, such as Internet Explorer, from Windows. Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and

press the Enter key or click Go.

2If it’s your first time logging into Embedded Web Service you need to log-in as an administrator. Type in the below default ID and password.

•ID: admin

•Password: dell00000

2. Using a network-connected machine 87