3Com 3CRWX440095A, 3CRWX120695A manual Opens a Telnet client session with a remote device

158CHAPTER 6: IP SERVICES COMMANDS

History —Introduced in MSS Version 3.0.

Examples — To set the time zone for Pacific Standard Time (PST), type the following command:

WX1200# set timezone PST -8

Timezone is set to 'PST', offset from UTC is -8:0 hours.

See Also

„clear summertime on page 115

„clear timezone on page 116

„display summertime on page 130

„display timedate on page 130

„display timezone on page 131

„set summertime on page 154

„set timedate on page 156

telnet Opens a Telnet client session with a remote device.

Syntax — telnet {ip-addr hostname} [port port-num]

„ip-addr— IP address of the remote device.

„hostname — Hostname of the remote device.

„port port-num— TCP port number on which the TCP server on the remote device listens for Telnet connections.

Defaults — MSS attempts to establish Telnet connections with TCP port 23 by default.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — To end a Telnet session from the remote device, press Ctrl+t or type quit or logout in the management session on the remote device. To end a client session from the local WX switch, use the clear sessions telnet client command.