GROUND LIFT SWITCH
This switch allows the signal ground to be disconnected from the chassis. In some installations a hum loop may exist due to duplicate ground paths from different equipment. Use this switch to remove the connection from 0V to ground thus allowing some flexibility in your particular
PROCESSOR SOURCE AND RETURN
These RCA connections are for use with a
PROCESSOR SWITCH
This switch is used in conjunction with the processor source and return terminals, and controls whether the amplifier is used via the normal inputs or the processor return input.
PRE OUT OUTPUT
The
MAINS POWER CORD IEC SOCKET
This connector is where the mains supply cable from your wall connects to the amplifier. You will notice that a fuse holder is mounted within this connection, and it holds a mains fuse to provide surge and overload protection for your amplifier.
RAIL FUSES
These tubular fuse holders house the positive and negative rail protection fuses. Depress and turn anti- clockwise to open. An LED is fitted next to each fuse holder to indicate a blown fuse.
PHONO EARTH POST
This is a chassis connected
9