InFocus IN32, IN34, IN36 manual Shutting down the projector, Troubleshooting your setup

Models: IN36 IN34 IN32

1 47
Download 47 pages 54.49 Kb
Page 21
Image 21

Shutting down the projector

The projector automatically blanks the screen after no active source is detected for 30 minutes. This blank screen helps preserve the life of the pro- jector. The image returns when an active source is detected or a remote or keypad button is pressed.

Screen Save

You can make the blank screen appear after five minutes by turning on Screen Save in the Settings>System menu. See page 29. There are six time options for the Screen Save feature. They range from five minutes to 30 min- utes with five minute intervals.

Power Save

The projector also has a Power Save feature that automatically turns the lamp off after no signal is detected for 20 minutes. After 10 additional min- utes with no signal, the projector powers down. If an active signal is received before the projector powers down, the image is displayed. You must press the Power button to display an image after 30 minutes have passed. When Power Save is enabled, Screen Save is disabled. See page 29.

Turning off the projector

To turn off the projector, press the Power button and verify that you want to turn the projector off by pressing the Power button again within 3 seconds. You can cancel the shutdown by not pressing the Power button a second time. The lamp turns off and the LED blinks amber for 1 minute while the fans continue to run to cool the lamp. When the lamp has cooled, the LED lights amber and the fans stop. Unplug the power cable to completely power off the projector.

Troubleshooting your setup

If your image appears correctly on the screen, skip to the next section (page 21). If it does not, troubleshoot the setup.

The Status Indicator Panel on top of the projector indicates the state of the projector and can help you troubleshoot.

.

Table 1: Status indicator light behavior and meaning

Status Indicator Panel Symbols

Meaning

 

 

Power, solid amber

The projector is plugged in.

Power, blinking green

The power button has been pressed and

the software is initializing.

 

Power, solid green

The projector is on and initialized.

 

Power, blinking amber

The power button has been pressed twice

to turn the projector off and the fans are

 

 

running to cool the projector.

 

 

Thermometer

The projector is too hot. Make sure the

 

vents aren’t blocked (see page 19). Turn

 

off the projector and wait one minute,

 

then turn the projector on again. Contact

 

Technical Support if the problem persists.

 

 

Lamp

Turn off the projector and wait one

 

minute, then turn the projector on again.

 

If the lamp light turns on again, replace the

 

lamp and reset the lamp timer.

 

 

Wrench/Service

Turn off the projector and wait one

 

minute, then turn the projector on again.

 

If the service lamp turns on again, service

 

is required. Visit www.infocus.com/service

 

to contact Service.

 

 

12

Page 21
Image 21
InFocus IN32, IN34 Shutting down the projector, Troubleshooting your setup, Status indicator light behavior and meaning

IN36, IN34, IN32 specifications

InFocus, a recognized name in the realm of projection technology, has introduced its innovative models, the IN34 and IN32 projectors. These projectors are designed to meet the diverse needs of both corporate environments and educational settings, emphasizing versatility and high-quality performance.

The InFocus IN34 and IN32 boast impressive resolutions, with the IN34 supporting WXGA (1280x800) and the IN32 offering standard XGA (1024x768) resolution. This difference makes the IN34 particularly appealing for users needing broader aspect ratios for presentations, while the IN32 provides clarity for traditional media and environments where XGA resolution is sufficient.

Both models deliver bright images with high lumens ratings, making them ideal for use in well-lit rooms. The IN34 provides up to 3200 lumens, ensuring clear visibility during daylight presentations, while the IN32 offers 3000 lumens, catering to similar needs. With such brightness levels, users can conduct meetings or lectures without concerns about ambient light affecting visibility.

In terms of connectivity, the IN34 and IN32 are equipped with a range of ports, including HDMI, VGA, and USB ports, allowing seamless integration with various devices. This flexibility is vital in today's diverse technological landscape, accommodating laptops, tablets, and other media players effortlessly.

Both projectors are designed for easy maintenance, featuring long-lasting lamp life, estimated to last up to 10,000 hours in eco mode. This longevity translates to lower operational costs, reducing the frequency of lamp replacements and ensuring reliability during extensive usage.

To enhance user experience, the IN34 and IN32 include built-in speakers, eliminating the need for external audio devices in smaller settings. Additionally, both models come with advanced cooling technologies to minimize noise levels, thereby enabling focused presentations without the distraction of fan sounds.

InFocus has also prioritized portability with the IN34 and IN32, designing them to be lightweight and compact. This makes it convenient for users to transport the projectors between different locations, whether for business meetings, educational purposes, or even home entertainment.

In summary, the InFocus IN34 and IN32 projectors stand out for their excellent brightness, varied resolution options, convenient connectivity, and user-friendly features. They are ideal for anyone seeking reliable projection solutions in a range of environments, combining performance with practicality.