![](/images/new-backgrounds/1188845/18884561x1.webp)
Table 4.2: |
| ||
Wilkerson ER1 Series | 5 | ||
SMC | 6 | ||
Section 4.2.2 Configuring Slide Adjust Modules |
|
| |
To get to the configuration screen for slide adjust | modules: |
|
|
a)Go to the “Auto Sets” screen. This screen is reached by pressing the “AUTO SETS” softkey in the Main Menu or Press Control screen.
b)With the RUN/PROG key switch in the PROG position, press the “CONFIGURE” softkey and enter the configuration code. The code is provided separately from this manual for administrative control.
c)Press the “CONFIGURE SLIDE”softkey.
d)Turn the Slide Adjust OFF/ON selector switch for your control to the ON position.
At this point the screen should look similar to Figure 3.3.
Figure 4.3: Example Slide Configuration Screen
There are several parameters that must be configured in this screen. The editing cursor indicates which
April 17, 2000 Man ual Versio n 1.0 | 4.7 |