3-48
Cisco SFS 7024 Hardware Users Guide
OL-8794-02
Chapter
Debug message levels 1 through 5: Debug messages are for supplier and/or Cisco engineering use
and are not necessarily indicative of actions that an end user may need to ta ke.
–
DEBUG1 – Messages that describe the states of connections and links.
–
DEBUG2 – Messages that describe major configuration chang es or operations.
–
DEBUG3 – Messages that describe the I/O flow.
–
DEBUG4 – Messages that contain the packet dumps within an I/O flow. I/O flows contain
multiple packets.
–
DEBUG5 – Messages that contain the packet dumps within an I/O flow. I/O flows contain
multiple packets.
Note When configuring the log levels to display debug messages, care should be taken to ensure that system
performance issues are weighed against troubleshooting requirements. G enerally, the higher the debug
number the more information is written to the log. Specifically, debug 3-5 have the most affect on system
performance.
Preset Tab
The Preset tab allows the user to quickly change log level settings for all software modules on the switch.
Figure 3-24 Log System Configurator: Preset Tab
To change the log level settings:
Step 1 Click the On-Off checkbox to the right of the setting(s).
Step 2 Click the Submit button to save any changes.