Chapter

Check the Installation Site

The SFS 7024 switch is designed to be installed in an existing server cabinet (not a telco cabinet), where it can be mounted in a standard equipment rack. Mounting brackets are integrated with the switch.

Be sure of the following:

•The cabinet has a full earth ground to provide reliable grounding.

•There is enough room to work on the equipment.

•The equipment will have enough clearance for front and rear access.

•The IB cables can be accessed easily.

•Water or moisture cannot enter the switch.

•The ambient temperature stays between 50° - 113°F (10° - 45° C).

•Cabinet doors do not interfere with front-to-back air flow.

The cabinet should have its own power distribution (with switch). If the switch has two power supplies, it is suggested that a cabinet with dual power distribution units is used.

It is recommended that cabinet anti-tip devices are used. This is especially true if installing or removing an SFS 7024 switch in the upper half of the cabinet when the lower half is empty.

Unpack the Equipment

Warning Read all installation instructions before connecting the system to its power source.

Step 1 Carefully open the box and unpack the SFS 7024 switch. The SFS 7024 is shipped fully populated and should contain.

–SFS 7024 Chassis

–Leaf modules (up to 24)

–Leaf module blanks (up to 23). These blanks populate unused leaf module slots to help maintain the thermal integrity of the chassis.

–Spine modules (up to 6)

–Spine module blanks (up to 4). These blanks populate unused spine module slots to help maintain the thermal integrity of the chassis.

–Power Supplies: up to twelve (12)

–Power supply blanks (up to 6). These blanks populate unused power supply slots to help maintain the thermal integrity of the chassis.

–Fans (8)

–Mounting hardware kits

Step 2 Inspect the equipment for any shipping damage and report any problems to the shipping company. Step 3 Verify that the equipment serial numbers match those on the packing slip.

Step 4 Resolve any issues with incorrect serial numbers or missing/incorrect parts before installing the equipment.

Cisco SFS 7024 Hardware Users Guide

2-14

OL-8794-02

 

 

Page 29 Page 31
Page 30
Image 30
Cisco Systems SFS 7024 manual Check the Installation Site, Unpack the Equipment
Page 29 Page 31

SFS 7024 specifications

Cisco Systems SFS 7024 is a high-performance, scalable storage solution designed to meet the demanding needs of modern data-driven enterprises. Generally recognized for its reliability and efficiency, the SFS 7024 stands out in environments where performance, availability, and scalability are paramount.

One of the main features of the SFS 7024 is its ability to support high-speed data transfers, making it suitable for applications that require rapid access to large datasets. The system leverages advanced networking technologies, including InfiniBand, to achieve impressive throughput and low-latency communication between storage nodes. This technology ensures that data can be accessed quickly, which is crucial for applications such as high-performance computing, big data analytics, and virtualized environments.

The architecture of the SFS 7024 incorporates a clustered design that allows for easy expansion. Businesses can start with a smaller configuration and scale up as their storage needs grow. This modularity reduces the risk of over-provisioning and helps organizations manage their budgets effectively. The system supports both file and block storage, providing flexibility in how data is stored and accessed.

Another significant characteristic of the SFS 7024 is its robust data protection features. With built-in redundancy and automatic failover capabilities, the system ensures continued operation even in the event of hardware failures. Data integrity is maintained through advanced error correction protocols, enhancing the overall reliability of the storage solution.

Cisco also integrates powerful management tools with the SFS 7024. The system's management interface allows administrators to monitor performance metrics, manage resources, and configure settings from a centralized location. This simplifies daily operations and reduces the complexity of managing large storage environments.

In summary, Cisco Systems SFS 7024 is a distinguished storage solution characterized by its high-speed performance, modular scalability, and robust data protection features. With its innovative technologies and user-friendly management capabilities, it serves as an ideal choice for enterprises looking to enhance their storage infrastructure. Whether dealing with intensive data workloads or seeking a dependable storage system, organizations can rely on the SFS 7024 to meet their evolving needs.
Top Page Image Contents