![](/images/new-backgrounds/1149424/149424107x1.webp)
4Novell NetWare Configuration
If you configured NetWare using PCONSOLE
If you used PCONSOLE for your initial conÞguration, there will be no conÞguration Þle. Use the Advanced ConÞguration Tool to change the print server name or password.
1.Select the ConÞgure print server (Þle server) from the Advanced conÞguration menu.
2.Select the Tektronix printer to be changed.
3.Select a Þle server that will be serviced by the printer.
4.Use the Print server name or Login password commands to make the change.
5.If the printer will service additional Þle servers, repeat Steps 3 and 4 for each Þle server.
6.When you have made the change on the last Þle server, answer yes to the prompt:
Have you made this change on all of the file servers serviced by this printer?
The change is stored in the printerÕs memory.
Note If you leave out a Þle server during this procedure, you must use
PCONSOLE to make the change on that server.
Exiting the Advanced ConÞguration Tool
The Exit menu quits the Advanced ConÞguration Tool and returns you to DOS.