Manuals / Brands / Computer Equipment / Computer Drive / Intel / Computer Equipment / Computer Drive

Intel SSDSA1MH080G1, SSDSA2MH080G1, X18-M, X25-M 6.2 SATA Commands

1 26

Download 26 pages, 301.25 Kb

Intel® X18-M/X25-M SATA Solid State Drive

July 2008 Advance Product Manual

Order Number: 319765-002US 23

Intel® X18-M/X25-M SATA SSD

6.1.6 48-Bit Address Command Set

The Intel X18-M/X25-M SATA SSDs support the 48-bit Address command set, which

consists of

• FLUSH CA CHE EXT

• READ DMA EXT

• READ NATIVE MAX ADDRESS EXT

• READ SECTOR(S) EXT

• READ VERIFY SECTOR(S) EXT

• SET MAX ADDRESS EXT

•WRITE DMA EXT

•WRITE MULTIPLE EXT

• WRITE SECTOR(S) EXT

6.1.7 Device Configuration Overlay Command Set

The Intel X18-M/X25-M SATA SSDs support the Device Configuration Overlay command

set, which consists of

• DEVICE CONFIGURATION FREEZE LOCK

• DEVICE CONFIGURATION IDENTITY

• DEVICE CONFIGURATION RESTORE

• DEVICE CONFIGURATION SET

6.1.8 General Purpose Log Command Set

The Intel X18-M/X25-M SATA SSDs support the General Purpose Log command set,

which consists of

• READ LOG EXT

•WRITE LOG EXT

6.2 SATA Commands

The SATA 2.6 specification is a super set of the AT A/A TAPI-7 specification with regard to

supported commands. The Intel X18-M/X25-M SATA SSDs support the following

features that are unique to the SATA specification.

6.2.1 Software Settings Preservation

The Intel X18-M/X25-M SATA SSDs support the SET FEATURES parameter to enable/

disable the preservation of software settings.

Contents

Main Intel X18-M/X25-M SATA Solid State Drive SSDSA1MH080G1, SSDSA2MH080G1 Advance Product Manual Ordering Information Decoder Intel High Performance Solid State Drive Ordering Information S D S A 1 8 0M H GS 0 1 Contents Page 1.0 Introduction 1.1 Product Overview 1.2 Block Diagram 2.0 Certifications Channel n Intel System On A Chip (SOC) Channel 0 Channel ... Table 1. Device Certifications 3.0 Product Specifications 3.1 Capacity 3.2 Performance Table 1. Device Certifications (Continued) Table 2. User Addressable Sectors 3.3 Electrical Characteristics 3.3.1 Supply Voltage 3.3.2 Power Consumption Table 5. Latency Specifications Table 6. Operating Voltage 3.4 Environmental Conditions 3.4.1 Temperature 3.4.2 Altitude 3.4.3 Shock and Vibration 3.4.4 Acoustics 3.5 Reliability 3.5.1 Nonrecoverable Read Errors Table 10. Radio Frequency Specifications Table 11. Reliability Specifications 3.5.2 Mean Time Between Failure 4.0 Mechanical Information 4.1 1.8 5 mm Intel X18-M SATA SSD Figure 2. Dimensions for Intel X18-M SATA SSD 1.8 5 mm Form Factor 4.2 2.5 7 mm Intel X25-M SATA SSD 4.3 2.5 9.5 mm Intel X25-M SATA SSD 5.0 Pin and Signal Descriptions 5.1 Pin Locations Signal Segment S1 Power Segment P1 5.1.1 1.8 Pin Locations 5.1.2 2.5 Pin Locations 5.2 Signal Description Table Figure 6. Layout of Signal and Power Segment Pins Signal Segment S1 Power Segment P1 Table 12. Serial ATA Connector Pin Signal Definitions for 1.8 and 2.5 Form Factors Table 13. Serial ATA Power Pin Definitions for 1.8 Form Factor Table 13. Serial ATA Power Pin Definitions for 1.8 Form Factor (Continued) Table 14. Serial ATA Power Pin Definitions for 2.5 Form Factor 5.3 Hot Plug Support 6.0 Command Sets 6.1 ATA Commands 6.1.1 ATA General Feature Command Set 6.1.1.1 IDENTIFY DEVICE Data Table 15. Returned Sector Data (Continued) 6.1.2 Power Management Command Set 6.1.3 Security Mode Feature Set 6.1.4 SMART Command Set 6.1.5 Host Protected Area Command Set 6.1.6 48-Bit Address Command Set 6.1.7 Device Configuration Overlay Command Set 6.1.8 General Purpose Log Command Set 6.2 SATA Commands 6.2.1 Software Settings Preservation 6.2.2 Native Command Queuing 7.0 References 8.0 Terms and Acronyms 9.0 Revision History Table 17. Glossary of Terms and Acronyms (Continued)