Manuals / Brands / Computer Equipment / Computer Drive / Intel / Computer Equipment / Computer Drive

Intel SSDSA1MH080G1, SSDSA2MH080G1, X18-M, X25-M 3.4 Environmental Conditions

1 26

Download 26 pages, 301.25 Kb

Intel® X18-M/X25-M SATA Solid State Drive

July 2008 Advance Product Manual

Order Number: 319765-002US 9

Intel® X18-M/X25-M SATA SSD

3.4 Environmental Conditions

3.4.1 Temperature

Note: without condensation.

3.4.2 Altitude

The drive is not sensitive to changes in altitude because it has no moving parts. Drive

tested within -1K and +40K feet.

3.4.3 Shock and Vibration

Notes:

1. Shock specifications assumes that the SSD is mounted securely with the input vibration applied to the drive mounting

screws. Stimulus may be applied in the X, Y or Z axis.

2. Vibration specifications assumes that the SSD is mounted securely with the input vibration applied to the drive mounting

screws. Stimulus may be applied in the X, Y or Z axis.

3. Sine wave sweeping 1 oct/min.

3.4.4 Acoustics

The SSD has no moving or noise-emitting parts; therefore, it produces negligible sound

(0 dB) in all modes of operation.

Table 8. Temperature R elated Specifications

Mode Min Typ Max Unit

Ambient Temperature Operating 0 70 oC

Non-Operating -55 95 oC

Temperature Gradient Operating 20 oC/hr *

Non-Operating 30 oC/hr *

Humidity Operating 5 95 %

Non-Operating 5 95 %

Table 9. Shock and Vi bration Specifications

Mode Timing Max Unit

Shock1Operating at 0.5 msec 1,000 G

Non-Operating at 0.5 msec 1,000 G

Vibration2Operating 2.17 G 7-800 Hz

Non-Operating 3.13 G 10-500 Hz3

Contents

Main Intel X18-M/X25-M SATA Solid State Drive SSDSA1MH080G1, SSDSA2MH080G1 Advance Product Manual Ordering Information Decoder Intel High Performance Solid State Drive Ordering Information S D S A 1 8 0M H GS 0 1 Contents Page 1.0 Introduction 1.1 Product Overview 1.2 Block Diagram 2.0 Certifications Channel n Intel System On A Chip (SOC) Channel 0 Channel ... Table 1. Device Certifications 3.0 Product Specifications 3.1 Capacity 3.2 Performance Table 1. Device Certifications (Continued) Table 2. User Addressable Sectors 3.3 Electrical Characteristics 3.3.1 Supply Voltage 3.3.2 Power Consumption Table 5. Latency Specifications Table 6. Operating Voltage 3.4 Environmental Conditions 3.4.1 Temperature 3.4.2 Altitude 3.4.3 Shock and Vibration 3.4.4 Acoustics 3.5 Reliability 3.5.1 Nonrecoverable Read Errors Table 10. Radio Frequency Specifications Table 11. Reliability Specifications 3.5.2 Mean Time Between Failure 4.0 Mechanical Information 4.1 1.8 5 mm Intel X18-M SATA SSD Figure 2. Dimensions for Intel X18-M SATA SSD 1.8 5 mm Form Factor 4.2 2.5 7 mm Intel X25-M SATA SSD 4.3 2.5 9.5 mm Intel X25-M SATA SSD 5.0 Pin and Signal Descriptions 5.1 Pin Locations Signal Segment S1 Power Segment P1 5.1.1 1.8 Pin Locations 5.1.2 2.5 Pin Locations 5.2 Signal Description Table Figure 6. Layout of Signal and Power Segment Pins Signal Segment S1 Power Segment P1 Table 12. Serial ATA Connector Pin Signal Definitions for 1.8 and 2.5 Form Factors Table 13. Serial ATA Power Pin Definitions for 1.8 Form Factor Table 13. Serial ATA Power Pin Definitions for 1.8 Form Factor (Continued) Table 14. Serial ATA Power Pin Definitions for 2.5 Form Factor 5.3 Hot Plug Support 6.0 Command Sets 6.1 ATA Commands 6.1.1 ATA General Feature Command Set 6.1.1.1 IDENTIFY DEVICE Data Table 15. Returned Sector Data (Continued) 6.1.2 Power Management Command Set 6.1.3 Security Mode Feature Set 6.1.4 SMART Command Set 6.1.5 Host Protected Area Command Set 6.1.6 48-Bit Address Command Set 6.1.7 Device Configuration Overlay Command Set 6.1.8 General Purpose Log Command Set 6.2 SATA Commands 6.2.1 Software Settings Preservation 6.2.2 Native Command Queuing 7.0 References 8.0 Terms and Acronyms 9.0 Revision History Table 17. Glossary of Terms and Acronyms (Continued)