Intel® X18-M/X25-M SATA Solid State Drive
Advance Product Manual July 2008
2Order Number: 319765-002US
L
Ordering Information
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR
OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS
OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING
TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE,
MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for
use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications.
Intel may make changes to specifications and product descriptions at any time, without notice.
Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the
presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel
or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights.
IMPORTANT - PLEASE READ BEFORE INSTALLING OR USING INTEL® PRE-RELEASE PRODUCTS.
Please review the terms at http://www.intel.com/netcomms/prerelease_terms.htm carefully before using any Intel® pre-release product, including any
evaluation, development or reference hardware and/or software product (collectively, “Pre-Release Product”). By using the Pre-Release Product, you
indicate your acceptance of these terms, which constitute the agreement (the “Agreement”) between you and Intel Corporation (“Intel”). In the event
that you do not agree with any of these terms and conditions, do not use or install the Pre-Release Product and promptly return it unused to Intel.
Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for
future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.
This document contains information on products in the design phase of development. The information here is subject to change without notice. Do not
finalize a design with this information.
This Advance Product Manual as well as the software described in it is furnished under license and may only be used or copied in accordance with the
terms of the license. The information in this manual is furnished for informational use only, is subject to change without notice, and should not be
construed as a commitment by Intel Corporation. Intel Corporation assumes no responsibility or liability for any errors or inaccuracies that may appear
in this document or any software that may be provided in association with this document.
Except as permitted by such license, no part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any
means without the express written consent of Intel Corporation.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Copies of documents which have an order number and are referenced in this document, or other Intel literature may be obtained by calling 1-800-548-
4725 or by visiting Intel's website at http://www.intel.com.
*Other names and brands may be claimed as the property of others. Copyright © 2008, Intel Corporation. All Rights Reserved.

Decoder

Intel High Performance Solid State Drive Ordering Information

Part Number MM # Device Nomenclature Packaging
SSDSA1MH080G1 895506 80 GB SATA 1.8” 5 mm Drive, MLC, 50 nm, Qualification Sample 1 unit
SSDSA2MH080G1 895507 80 GB SATA 2.5” 7 mm Drive, MLC, 50 nm, Qualification Sample 1 unit
SSDSA2MH080G1 898189 80 GB SATA 2.5” 9.5 mm Drive, MLC, 50 nm, Qualification Sample 1 unit

S D S A 1 8 0M H GS 0

Product Type Designator
SSD = Solid State Disk
Density
004G = 4 GB
008G = 8 GB
016G = 16 GB
032G = 32 GB
064G = 64 GB
080G = 80 GB
Product Generation
1-9 Generations
Bus Architect ure
PA = PATA
SA = SATA
US = Universal Se r i al Bus
Form Factor
1 = 1.8" Drive
2 = 2.5" Drive
Product Technology Type
S = Single Level Cell
M = Multi-Level Cell

1

Feature
H = High Perfor m a nce