Intel SSDSA1MH080G1, SSDSA2MH080G1, X18-M, X25-M 7.0 References

Intel® X18-M/X25-M SATA SSD

Intel® X18-M/X25-M SATA Solid State Drive

Advance Product Manual July 2008

24 Order Number: 319765-002US

Intel® X18-M/X25-M SATA SSD

6.2.2 Native Command Queuing

The Intel X18-M/X25-M SATA SSDs support the Native Command Queuing (NCQ)

command set, which consists of

• READ FPDMA QUEUED

• WRITE FPDMA QUEUED

Note: With a maximum queue depth equal to 31.

7.0 References

This document references standards defined by a variety of organizations. Use the

following list to identify the location of an organization’s standards information.

Table 16. Standards References

Date or

Rev. # Title Location

July 2007 RoHS Search for material description datasheet at http://

intel.pcnalert.com

July 2007 SFF-8144, 1.8” drive form factor http://www.sffcommittee.org

June 2007 Intel Matrix Storage Manager http://support.intel.com/support/chipsets/imsm/

February 2007 Serial ATA Revision 2.6 http://www.sata-io.org

May 2006 SFF-8223, 2.5" Drive w/Serial Attachment

Connector http://www.sffcommittee.org

May 2005 SFF-8201, 2.5” drive form factor http://www.sffcommittee.org

April 2004 ATA-6 spec http://www.t13.org/project/d1410r3b-ATA-ATAPI-6.pdf

April 2004 ATA-7 Volume 1

http://www.t13.org/Documents/UploadedDocuments/

docs2007/D1532v1r4b-

AT_Attachment_with_Packet_Interface_-

_7_Volume_1.pdf

1995

1996

1995

1995

1997

1994

International Electrotechnical Commission

EN 61000

4-2 (Personnel Electrostatic Discharge

Immunity)

4-3 (Electromagnetic compatibility (EMC))

4-4 (Electromagnetic compatibility (EMC))

4-5 (Electromagnetic compatibility (EMC))

4-6 (Electromagnetic compatibility (EMC))

4-11 (Voltage Variations)

http://www.iec.ch

1995 ENV 50204

(Radiated electromagnetic field from digital radio

telephones) http://www.iec.ch

Contents

Main Intel X18-M/X25-M SATA Solid State Drive SSDSA1MH080G1, SSDSA2MH080G1 Advance Product Manual Ordering Information Decoder Intel High Performance Solid State Drive Ordering Information S D S A 1 8 0M H GS 0 1 Contents Page 1.0 Introduction 1.1 Product Overview 1.2 Block Diagram 2.0 Certifications Channel n Intel System On A Chip (SOC) Channel 0 Channel ... Table 1. Device Certifications 3.0 Product Specifications 3.1 Capacity 3.2 Performance Table 1. Device Certifications (Continued) Table 2. User Addressable Sectors 3.3 Electrical Characteristics 3.3.1 Supply Voltage 3.3.2 Power Consumption Table 5. Latency Specifications Table 6. Operating Voltage 3.4 Environmental Conditions 3.4.1 Temperature 3.4.2 Altitude 3.4.3 Shock and Vibration 3.4.4 Acoustics 3.5 Reliability 3.5.1 Nonrecoverable Read Errors Table 10. Radio Frequency Specifications Table 11. Reliability Specifications 3.5.2 Mean Time Between Failure 4.0 Mechanical Information 4.1 1.8 5 mm Intel X18-M SATA SSD Figure 2. Dimensions for Intel X18-M SATA SSD 1.8 5 mm Form Factor 4.2 2.5 7 mm Intel X25-M SATA SSD 4.3 2.5 9.5 mm Intel X25-M SATA SSD 5.0 Pin and Signal Descriptions 5.1 Pin Locations Signal Segment S1 Power Segment P1 5.1.1 1.8 Pin Locations 5.1.2 2.5 Pin Locations 5.2 Signal Description Table Figure 6. Layout of Signal and Power Segment Pins Signal Segment S1 Power Segment P1 Table 12. Serial ATA Connector Pin Signal Definitions for 1.8 and 2.5 Form Factors Table 13. Serial ATA Power Pin Definitions for 1.8 Form Factor Table 13. Serial ATA Power Pin Definitions for 1.8 Form Factor (Continued) Table 14. Serial ATA Power Pin Definitions for 2.5 Form Factor 5.3 Hot Plug Support 6.0 Command Sets 6.1 ATA Commands 6.1.1 ATA General Feature Command Set 6.1.1.1 IDENTIFY DEVICE Data Table 15. Returned Sector Data (Continued) 6.1.2 Power Management Command Set 6.1.3 Security Mode Feature Set 6.1.4 SMART Command Set 6.1.5 Host Protected Area Command Set 6.1.6 48-Bit Address Command Set 6.1.7 Device Configuration Overlay Command Set 6.1.8 General Purpose Log Command Set 6.2 SATA Commands 6.2.1 Software Settings Preservation 6.2.2 Native Command Queuing 7.0 References 8.0 Terms and Acronyms 9.0 Revision History Table 17. Glossary of Terms and Acronyms (Continued)