Galaxy H7920 Mobile Router User Manual Chapter 3: Router Configuration
M80-792001-01 33
SNMP: Enable or Disable, tick it to enable the SNMP function. It supports
SNMP V1 and V2C (V3 ready) automatically.
Set Community: Set the community name, such as "public".
IP: Set the SNMP management IP address. Usually, it is the router LAN
interface IP address.
System Name: Set the router name that will display on the NMS.
System Contact: Set the router contact name.
System Location: Set the router location.
It may be required to save all settings and restart the router to affect it.
Dynamic DNS
As you know, there are many DNS server at Internet; it records and translates
the domain name into corresponding IP address. However, normal DNS server
only maps the domain name and static IP address.
Dynamic DNS service will map the specified domain name to a dynamic IP
address. With the built-in client in Galaxy router, the dynamic IP address
assigned by mobile network and the domain name applied from dynamic DNS
service provider will be registered at Dynamic DNS server when the Galaxy
router is connected. Meanwhile, the built-in client will update the operation
information at the interval defined by the dynamic DNS server.
Click "Start"->"Network Setting"->"Dynamic DNS" menu to start this setup
page.
Galaxy H7920 Mobile Router User Manual Chapter 3: Router Configuration
M80-792001-01 34
Before enabling the dynamic DNS function, you should apply a valid account
from a service provider in the drop list. Input the following information.
Service Provider
Host Name
User ID/E-Mail
Password/Key
You can get the information from dynamic DNS service provider after successful
application.
Dynamic DNS service provider list will be added or deleted accordingly.
3.2.5 Route Configuration Click “Start” > "Route Configuration", the below picture will be displayed.
There are three sub-menus at "Route Configuration".