Allied Telesis at-8116 manual Snmp Trap Message Commands, Set-comm, Get-auth, Set-auth

SNMP Commands

set-comm

set-comm {readwrite} <community-string>

This command lets you specify the SNMP community string for each of the two access modes: read and write.

SYS_console>set-comm write password

New write community is: < password >

SYS_console>

SNMP Trap Message Commands

When the Switch detects an extraordinary event, it generates a trap. A trap is a notification message that may be sent to predefined Network Manager Stations. A trap event may be a reset (cold or warm), detection of an interface link status change, an SNMP authentication failure due to an incorrect community string, etc.

The SNMP trap commands let you manage:

❑Whether or not the device issues an authentication trap

❑The list of selected SNMP Manager Stations to which the switch-generated traps will be sent by the SNMP agent. The list has a maximum capacity of five entries.

get-auth

Displays the Authentication Trap mode: enabled or disabled.

set-auth

set-auth {enabledisable}

This command allows the user to modify the Authentication Trap mode. The default value is enable, meaning that the switch will generate authentication traps. Changing the mode to disable will prevent the switch from sending authentication traps.

8-2