Using an SNMP Manager

 

IP Setup

1. Modify the system IP configuration to match your IP network. Use

 

the set-ip-cfg command in order to provide an IP address, a

 

netmask and a broadcast address (see IP Commands). For

 

example:

 

set-ip-cfg 129.001.001.064 255 255.255.255.0

 

129.001.001.000

 

Check that the actual IP configuration matches the desired one:

 

SYS_console>get-ip-cfg

 

The device IP address, netmask and broadcast are:

 

IP address: 129.001.001.064

 

IP netmask:255.255.255.000

 

IP broadcast: 129.001.001.000

 

2. Set the default gateway address using the set-gatew command.

 

This should be a station that can route IP packets to non-local IP

 

networks. For example:

 

SYS_console>set-gatew 129.1.1.1

 

3. Confirm that the default gateway IP address was properly

 

accepted:

 

SYS_console>get-gatew

 

Device default gateway address is :

 

129.001.001.001

15-2

Page 74
Image 74
Allied Telesis at-8116 manual SYSconsoleset-gatew