Administrative Interface

Software Requirements

If you are using a workstation, use the VT100 terminal emulation software appropriate for your workstation.

If you are using a PC to emulate a VT100 terminal, you can use the following software:

In a DOS environment:

MS-DOS 3.30 or later

PROCOMM PLUS for DOS

In a Windows 3.1 environment:

Microsoft Windows 3.1 or later

Windows Terminal or PROCOMM PLUS for Windows

In Windows 95 or NT

Hyperterminal

Note

Because of their compatibility and reliability, the software combination listed above are recommended. Other applications may also provide satisfactory results.

VT100 Terminal Settings

Use the following settings when connecting the VT100 terminal or terminal emulator to the AT-8116.

Communications Setup

9600 (baud)

No Parity

8 Data Bits, 1 Stop Bit

No Local Echo

VT100 Mode

Terminate the setup session by pressing Ctrl-C.

For details concerning using the SNMP agent, see Chapter 15, Using an SNMP Manager.

1-4

Page 8
Image 8
Allied Telesis at-8116 manual VT100 Terminal Settings, Software Requirements