Maxtor HVR-04E manual Setting Sensor at OSD menu

INSTALLATION AND CONNECTION HVR-04E

9.2. Setting Sensor at OSD menu

After a sensor is connected, it can be activated through the OSD Configuration menu.

Select the sensor number (S1, S2, etc.) and press the [Enter] button to configure. Use the [◄◄ / ►►] buttons to select “On” or “Off.” Press [EXIT] when finished.

<NOTE>

When activated, the “Pre / Post Alarm” function will cause the HVR-04E to record images at the specified Speed and Quality for a length of time before and/or after the sensor is triggered.