Maxtor manual HVR-04E Appendix

HVR-04E APPENDIX

(11)Select “Action” using [▲/▼] button and press [EXIT] button.

(12)Select “Add” using [◄◄ / ►►] button and press [EXIT] button.

(13)Select “Apply” using [▲/▼] button and press [EXIT] button. The HDD status is changed to “[*]”.

(14)Select “Action” using [▲/▼] button and press [EXIT] button.

(15)Select “Format” using [◄◄ / ►►] button and press [EXIT] button.

(16)Select “Apply” using [▲/▼] button and press [EXIT] button. The HDD status is changed to “[R]” after formatting.

(17)Shut down “Disk Manager” by pressing [EXIT] button.

<Note> HDD Type at Disk Manager

1.[R] Available of recording

2.[V] Connected and formatted as HVR-04E’s file system

If using ‘Add used’ command, it will be changed to [R]. There is no need to reformat.

3.[F] Connected but not available file system. After using ‘Add’, need to format for making as [R].

4.[*] Connected and added using the ‘ADD’ command. If formatting, it will be [R].

5.[X] HDD cable is not

<Note> HDD Managing Command

1.Format : Format as HVR-04E’s file system. Not available to PC file system.

2.Add : Add HDD for recording. Need to format.

3.Add Used : Add a HDD that has been used and formatted. There is no need to reformat

4.Remove : Remove current HDD. HDD can be reused without data loss by the ‘Add Used’ command.

5.Confirm Removed : Used when a removed HDD is still listed. ALL DATA WILL BE LOST!

<Note> How to format current HDD?

HVR-04E doesn’t need additional format command. Just do it; ‘Remove’ Æ ‘Add’ Æ ‘Format’.

50 2003.05.21 (v 1.0) Hunt Electronic USA, Inc.