APPENDIX

HVR-04E

<Note>

The dip switch should be set at ‘MASTER’ position for the first installed or built-in HDD. Additional HDD should be set as ‘SLAVE.’ Identical dip switch setting may cause system conflict or mal-function.

(3) Remove the 6 screws as illustrated below and pull up the cover from the rear part to open

(4)Take out power and data cable of HDD from Main PCB ASS’Y. Remove 4 HDD Bracket screws and take out HDD ASS’Y.

Page 47
Image 47
Maxtor HVR-04E manual Appendix