INSTALLATION AND CONNECTION

HVR-04E

INSTALLATION AND CONNECTION

4. Connecting & Running HVR-04E

4.1. Connecting camera

(1)Connect CCTV camera to HVR-04E with BNC cable as shown below.

(2)Set video type (NTSC/PAL) by rear panel’s switch.

<Note>

The video type for all channels should be either NTSC or PAL. NTSC is the standard used in North America.

(3) Set the impedance control switch for each channel as needed.

<Note>

It may be necessary to configure impedance of video input differently for each channel. For more detailed information, please refer to “Video type / impedance setup switch” in Appendix #2.

Page 11
Image 11
Maxtor manual Connecting & Running HVR-04E, Connecting camera