Chapter 5

IP Commands

This section lists the IP Configuration commands available to the command line interface. It is separated into different sections to allow simpler lookup: IP Configuration lists general configuration commands, Ping lists commands pertaining to the ping ability of the Agent, Address Resolution Protocol lists ARP-related information.

get-ip

This command shows the device’s current IP address, if any.

If the IP Config has already been defined

SYS_console>get-ip

--IP Config already defined

The device IP address is: 194.090.136.187.

If the device has no IP Address defined.

SYS_console> _

SYS_console>get-ip

--No IP Config defined SYS_console>

set-ip

set-ip<IPaddress>

5-1

Page 27
Image 27
Allied Telesis at-8116 manual IP Commands, Get-ip, Set-ipIPaddress