Chapter 11

Port Monitoring Commands

set-mon-port

This command sets the monitoring port (port containing the monitoring device, sniffer port). All traffic from the port specified by the monitor command will be duplicated on assigned ports. Port is a decimal number.

set-mon-port <port>

monitor

This command sets the port to be monitored and starts the monitoring process. All traffic from this port will be duplicated on the monitoring port specified by the set-mon-port command. The monitoring device or sniffer must be connected to the monitoring port before monitoring is activated.

monitor <port>

stop-mon

This command ends port monitoring.

get-nv-mon

This command retrieves the port monitoring information stored by the save-mon command in the NVRAM.

11-1

Page 59
Image 59
Allied Telesis at-8116 manual Port Monitoring Commands, Set-mon-port, Stop-mon, Get-nv-mon