Allied Telesis at-8116 manual Set-attr-prompt, Set-attr-msg, Set-attr-text, Set-passwd

AT-8116 User’s Guide

set-attr-prompt

This command sets the prompt attributes.

SYS_console>set-attr-prompt <number of option>

[arg #0] options: 0-normal,1-bold,2- underline,4-blink,8-reverse

SYS_console>

set-attr-msg

This command sets the display message attributes.

SYS_console>set-attr-msg <number of option>

[arg #0] options: 0-normal,1-bold,2- underline,4-blink,8-reverse

SYS_console>

set-attr-text

This command sets the text display attributes.

SYS_console>set-attr-text <number of option>

[arg #0] options: 0-normal,1-bold,2- underline,4-blink,8-reverse

SYS_console>

set-passwd

A password is not required to access the system software. However, a username is required to log in to the system. A user simply enters his/ her username when the username prompt appears and if you do not wish to set a password at this time, you only need to press the <enter> or <return> key twice to access the system’s software.

The set-passwdcommand allows a user to set a password or to change the original one, if previously installed. The system first prompts the user for the original (old) password. Then the system prompts you for a new password. Then, type the same password again for verification. At no time are any of the passwords echoed back to the user.

3-3