AT-8116 User’s Guide

sw-dnld

This command begins the software download process from the remote TFTP server specified by the set-tftp-srvr command, retrieving the file specified by the set-sw-file command.

set-fg-param

set-fg-param sets the Ethernet frame generator parameters [arg #0] destination address in hex format xx-xx-xx-xx-xx-xx

[arg #1] source address in hex format xx-xx-xx-xx-xx-xx

[arg #2] frame fill pattern - hex byte

[arg #3] frame length - including DA, SA and type/length

This command sets the frame generator parameters. dest and source are dash-separated hardware addresses in hex. fill_byte is a single byte used to fill the entire packet except for the first 12 bytes. length is the total length of the packet excluding CRC.

SYS_console>set-fg-param 00-0E-DE-02-80-01 00-0D-01-32-11-22 aa 100

SYS_telnet>

SYS_telnet>start-fg?

?

start-fg

start-fg starts the Ethernet frame generator

[arg #0] destination ports - ports list in decimal format: d-d-d-..-d

[arg #1] number of frames to be generated - 0=forever

[arg #2] frame per second SYS_telnet>

4-5

Page 25
Image 25
Allied Telesis at-8116 manual Sw-dnld, Set-fg-param, Start-fg